MrBeer.com - Jingleberry Beer

Jingleberry Beer

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS TIME.
Suggested lager time is 2 to 4 weeks.

A tasty, tart amber ale with a bit of sweetness and spice to warm up your cold winter's night.

RECIPE INCLUDES:
1 Can High Country Canadian Draft
1 Can Mellow Amber UME
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Can Boysenberries in Light Syrup
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
2 Cinnamon Sticks
3 Whole Cloves

All MR.BEER® mixes feature a complex blend of Pale malt, Caramel malt, Chocolate malt, Vienna malt and Munich malt. Blended with the finest hops by master brewers in state-of-the-art facilities, they provide the optimum flavor profiles for award winning beers.

Jingleberry Beer

Flavor: Malty
Alc/Vol: 6.3%
SRM (Color): 12
IBU (Bitterness): 14

Alc/Vol -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Golden Beers are between 0 - 6
- Amber Beers are between 7 - 12
- Dark Beers are 13 and over

IBU -- Shown in International Bittering Units, where:
- No bitterness 0 - 9
- Modest bitterness 10 - 19
- Noticeable bitterness 20 and over

Jingleberry Beer

A tasty, tart amber ale with a bit of sweetness and spice to warm up your cold winter's night.

RECIPE INCLUDES:
1 Can High Country Canadian Draft
1 Can Mellow Amber UME
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Can Boysenberries in Light Syrup
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
2 Cinnamon Sticks
3 Whole Cloves

Step 1: Sanitizing
Follow the steps outlined in the Instructions that came with your kit.

NOTE: Pour sanitizer from your brew keg into a blender and soak 10 minutes, then puree your fruit.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of beer mix, then place unopened cans of mix and UME in hot water to make the liquid easier to pour.

2.3. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot, then SLOWLY sprinkle in 1/2 pouch (1 cup) of Booster™ while continually stirring to avoid clumping.

2.4. Once the Booster™ is fully dissolved, bring to a boil, then remove from heat. Add 2 cinnamon sticks and 3 whole cloves. Stir to mix well, then cover and let steep for 5 minutes.

2.5. Stir beer mix and UME into mixture of water and Booster™. This mixture is called the wort.

NOTE: Hops appear as green leaf particles and do not dissolve.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Add your pureed fruit, stir vigorously to mix well.

2.7. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in the Instructions that came with your kit.

TIP: For best results allow to lager for at least 2 to 4 weeks.

Deluxe Bottling System
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

12 oz. Glass Long-Neck Bottles (Qty 24)
$22.95

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| Product Registration \| Contact Us \| Help? U.S.A. ©2008 Catalina Products, LLC. All rights reserved.